Steps in programming the wireless receiver:

  • Connect both USB and the AVR ISP mkII programmer to the board
  • Open the Arduino sketch in the Arduino IDE
  • Select the “STEIM wireless receiver” from the Board menu
  • Compile the code
  • This makes a temp directory with the hex file in (e.g. on Linux) /tmp/buildXXXXX.tmp/wireless_receiver_1_4.cpp.hex
  • Then use avrdude to burn it to the flash:
    avrdude -c avrispmkII -p m328p -P usb -U flash:w:/tmp/build4971464468714801572.tmp/wireless_receiver_1_4.cpp.hex
  • The output will be something like:
    avrdude: AVR device initialized and ready to accept instructions
    
    Reading | ################################################## | 100% 0.00s
    
    avrdude: Device signature = 0x1e950f
    avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
             To disable this feature, specify the -D option.
    avrdude: erasing chip
    avrdude: reading input file "/tmp/build4497645872316412355.tmp/wireless_receiver_1_4.cpp.hex"
    avrdude: input file /tmp/build4497645872316412355.tmp/wireless_receiver_1_4.cpp.hex auto detected as Intel Hex
    avrdude: writing flash (8492 bytes):
    
    Writing | ################################################## | 100% 2.64s
    
    avrdude: 8492 bytes of flash written
    avrdude: verifying flash memory against /tmp/build4497645872316412355.tmp/wireless_receiver_1_4.cpp.hex:
    avrdude: load data flash data from input file /tmp/build4497645872316412355.tmp/wireless_receiver_1_4.cpp.hex:
    avrdude: input file /tmp/build4497645872316412355.tmp/wireless_receiver_1_4.cpp.hex auto detected as Intel Hex
    avrdude: input file /tmp/build4497645872316412355.tmp/wireless_receiver_1_4.cpp.hex contains 8492 bytes
    avrdude: reading on-chip flash data:
    
    Reading | ################################################## | 100% 2.43s
    
    avrdude: verifying ...
    avrdude: 8492 bytes of flash verified
    
    avrdude: safemode: Fuses OK
    
    avrdude done.  Thank you.
    
 

Sorry you have no rights to view this post!

 

Sorry you have no rights to view this post!

 

Sorry you have no rights to view this post!

 

Sorry you have no rights to view this post!

© 2012 STEIM R&D Suffusion theme by Sayontan Sinha